From: twistertime36@gmail.com   
      
   I am working on a Rock Ola CD-8 Bubbler jukebox that is in my home and only   
   used occasionally.It had lost the programming and so I measured the onboard   
   NiCad battery and only had 1.25 volts and so I replaced with a Radio Shack   
   3.6v 700mah battery pack    
   and installed outside the    
   Control Computer.    
   Was able to power up and reset the unit back to Free play. The issue I am   
   having is that the programming to be able to play a complete album is not   
   taking for some reason.   
   Am able to get to S-4, 2 and then enter a number but when I try to enter 0 so   
   that it will play the complete album all I get is a dash(-). After I save this   
   it will not play the complete album, maybe 3 or 4 songs, replaces the cd,   
   scans again and selects    
   the cd again and plays the next song.   
      
   I am no expert but is it possible that I had to remap all the cds also? After   
   I did the battery replacement all I did was set it to free play mode and try   
   to enter the programming to play the complete album.   
      
   Could someone please help me in explaining to me what I should reprogram in   
   order to get back to normal.   
      
   Regards   
      
   Tony    
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)