From: raymondjohn1962@gmail.com   
      
   Acquired an old 3W-1 wallbox from my brother's garage when he was moving out.   
   Found a Program Window Glass and Program Holder Assembly on eBay and purchased   
   a 25Vac Transformer from Radio Shack along with new lamps from O'Reiley auto   
   parts.   
   Cleaned and polished the chrome and cosmetically the unit looks great.   
   However, when I provide power to the box, the new lamps do not light.  When I   
   trip the coin switches, I can manually advance the contact & motor assembly   
   and press the selection buttons and the buttons will release as I continue to   
   rotate the motor    
   manually.  The soldering does not look original and there are replaced and   
   what looks like missing or broken wires.  I have the schematic from the   
   Service Manual but it is difficult to interpret.  Does anyone have a   
   translater from the schematic wiring    
   diagram to the actual physical terminals and colored wires located within the   
   internal 3W-1?   
   I do have some digital photos of my wallbox.  Is there a method to post them   
   here?   
   Any assistance would be greatly appreciated.   
   P.S. My Wallbox S/N is 194139 so I am assuming the Figure 17 schematic in the   
   Service Manual is applicable.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)