On Sunday, August 16, 2015 at 11:32:28 AM UTC-5, Lars Sima wrote:   
   > Ok thanks for your reply. I Will try that again. I actually tested that   
   before, but I think I had too much weight, cause it became worse. So I thought   
   maybe I needed less weight.   
   > I saw in the manual that the weight of the tonearm "must" be between 8-12   
   grams.   
   >    
   > The tonearm just have metalspring for adjustment so there isn't any real   
   possibility for finetuning the weight.   
      
   I haven't had that model but the earlier models has a set screw on the tone   
   arm itself in the shaft that goes down to your reject switch. it is an   
   adjustment to raise and lower your tone arm assembly. that's how you fine tune   
   the adjustment on the needle.   
    Make sure you have the correct needle.  norm   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)