3b8054a7   
   From: spam@flippers.com   
      
   Greg wrote:   
   > Right off the bat I'll say I must be the stupidest guy around when it   
   > comes to jukebox knowledge. A couple years ago I ordered a CD Pro2   
   > player to replace my CDM12 unit. It came with an EPROM. The sticker on   
   > the EPROM says "CDM12 ver. 5.9" and the instruction sheet has one   
   > sentence: "CDM12 Mech Ver. 5.9 is installed at U14 in the Mechanism   
   > Control Computer". I find no U14 noted on any of my schematics and no   
   > reference to a Mechanism Control Computer anywhere in my   
   > documentation. Can anyone tell me where I'm supposed to install this   
   > EPROM?   
   > My box is a 50 CD Wurlitzer OMT, ser no. 36025976 with I84 amp.   
   > Thanks for any help!   
      
   The IC probably goes in the SC&C -> IC23/(IC22 older), but that doesn't   
   sound like the part number from Wurlitzer.   
      
   Did you try simply asking the company you bought the kit from? It might   
   be for updating the controller PCB under the player...   
      
   John :-#)#   
      
   --   
       (Please post followups or tech inquiries to the newsgroup)   
     John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9   
     Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games)   
                        www.flippers.com   
          "Old pinballers never die, they just flip out."   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)