XPost: comp.os.ms-windows.programmer.win32   
   From: address@is.invalid   
      
   Hello all,   
      
   Some time ago I stumbled over a few webp images.  After some some   
   websearching I found a dll which could decode them into a raw byte arrays,   
   and with help of GDI+ I was able to save that into a native format (jpg,   
   png, etc), allowing me to view the resulting images.   
      
      
   While doing the above I was (again) made aware that GDI+ has(?) installable   
   image decoders & encoders.   So, I thought it would be an idea to see if I   
   could write-and-install a webp decoder to that list.   
      
   The thing is, I can't seem to find anything of worth regarding native GDI+   
   installable image decoders, and only very little about a WIC type of   
   decoder.  At least not enough to be able to get a complete picture about   
   what needs to be done.   
      
      
   So, I'm wondering if anyone here knows anything about how to create,   
   preferrably, a native GDI+ decoder - though information about how to create   
   WIC type of decoder is quite welcome too. (I'm an Assembly programmer, which   
   is why I rather work with the former than the latter)   
      
   Regards,   
   Rudy Wieser   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)