From: murig@verizon.net   
      
   On Sat, 29 Dec 2007 08:58:57 -0600, John Fields wrote:   
      
   > On Sat, 29 Dec 2007 12:49:01 GMT, mike urig  wrote:   
   >   
   >>I want to reduce the voltage from 1.5 volts to 1.0 - .90 volts. What   
   >>resister would do this and what end goes toward to 1.5 volt side? Thanks   
   >   
   > ---   
   > That's not enough information.  What are you trying to do?   
      
   The voltage drop will tell an onboard motorcycle computer to richen the   
   fuel ratio a little more than stock. The signal comes from an O2 sensor   
   in the exhaust header pipes. I'm just trying to reduce the voltage a   
   little more than stock.   
      
   You can go here: http://www.nightrider.com/parts/   
   hd2007HD_nbo2_voltage_divide.htm and read the part about "Testing the   
   NBO2 Inline Enrichment Device off the bike".   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)