XPost: sci.electronics.components, sci.electronics.design   
   From: jamie_ka1lpa_not_valid_after_ka1lpa_@charter.net   
      
   m.a wrote:   
      
   > Hello,   
   >   
   >    I am looking for an evaluation board that has an MCU (preferably low   
   > power) and an ADC and UART.   
   >   
   > I want that I program MCU in such a way that when it gets a command from   
   > UART, it get 1000 samples from ADC and place on RAM and at the end of   
   > capturing sending them to another system via UART.   
   >   
   > speed of transfer to other system via UART is not important ( I have several   
   > minute to do so).   
   >   
   > ADC sampling rate should be 100KSPS.   
   >   
   >   
   >   
   > Any help in selecting a suitable evaluation board is very appreciated.   
   >   
   >   
   >   
   > Regards   
   >   
   >   
   >   
   >   
   Look at AVR or Pic Programable chips.   
     They'll do what you need in a small non complicated package.   
     You just need to code alittle but not much..   
      
      
   http://webpages.charter.net/jamie_5"   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)