From: jasen@xnet.co.nz   
      
   On 2009-02-02, John  wrote:   
   > I would like to change the led's in a old pc I recovered amber=power   
   > green=hd from there factory color to different colors like blue and super   
   > red led's.   
      
   > I use to play electronic hobbies years ago so I’m concerned that if I   
   > just solder  the defferent color led’s to the leads  I might fry   
   > something.   
      
   powersupply for the existing LEDs is most probably 5V through a series   
   resistor, so just replacing the leds should work.  the new leds may not   
   light to full brightness but will probably look good none-the-less.   
   There's no risk of damage to the PC by this modification as long as you   
   take due care.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)