From: JimandI@webtv.net   
      
   I have used a "retired" Panasonic VHS camcorder for many years for our   
   web cam link.  (see below)  Unfortunately the cam was fried by lightning   
   a while back. After looking at several pawn shops I found a couple of   
   JVC brand cams to replace the broken Panasonic.  However, I am unable to   
   figure out how to remove the sp, no tape, mag power, etc .... displays   
   that now appear in the pic.  On the panasonic it was just a matter of   
   holding down the reverse & display buttons & the displays would go away.   
   Have tried various ways, but no results.  Any suggestions out there ?   
   Thanks, Mike   
      
      
   Mike & Jim's RIVERCAM   
   http://jimandi.us/   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)