From: sqwertzme@gmail.invalid   
      
   On Sat, 25 Jul 2020 11:36:30 -0700, Jeff Liebermann wrote:   
      
   > For testing:   
   > Setup a fast computah, with USB 3.0 for the adapter.  Find an 802.11ac   
   > wireless router.  Attach a fast desktop running gigabit ethernet.  Run   
   > iPerf3 on both machines:   
   >    
   > Run the test using TCP (not UDP) using parameters tweaked for gigabit.   
   > If you're not sure, lose the wireless temporarily and try iperf3 via   
   > gigabit ethernet between the computers trough the ethernet ports on   
   > the router.  You should get over 800 Mbits/sec.  Do it anyway.  It's   
   > good practice.   
      
   C'mon - I've seen your office and I know you can set this up with a   
   just a cable change. But I'm still limping along with my 20-year old   
   Antec case which I pilfered from the SCO Attic and an M4A87XD/USB3   
   motherboard. And just last week I upgraded to a Phenom II X4 945   
   (from Athlon II X2 255).   
      
   If I was still in scruz I would gladly have donated this to you for   
   disection rather then returning to Amazon :-)  But it looks like it   
   is/was a short-lived product - not worth investigating.  Most people   
   are blaming the drivers .  Sounds like a job for   
   Arnet/Digiboard Bill!   
      
   -sw   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)