From: daniel-r@gmx.net   
      
   That works..   
      
   "foxidrive"  schrieb im Newsbeitrag   
   news:53573208$0$8093$c3e8da3$3304c218@news.astraweb.com...   
      
   On 23/04/2014 07:34, Daniel wrote:   
   > The output was :   
   > "Driver is running."   
   > if its enabled or   
   > "Device is disabled."   
   >   
   > if not   
   >   
   > In the Script the question was , if there is "running" its on an must be   
   > disabled, if no "running" there, its disabled and must be enabled.   
   >   
      
   That is what the code is meant to do, and should work if there is no   
   "running" in the output when it   
   is disabled.   
      
   Test the sample code below and see if it disables, and then enables, the   
   wlan.   
      
      
   @echo off   
   devcon disable "*DEV_4236"   
   pause   
   devcon status "*DEV_4236" |find /i "running" || devcon  enable "*DEV_4236" &   
   pause & goto :EOF   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)