From: foxidrive@server.invalid   
      
   On 23/04/2014 17:24, Daniel wrote:   
   > "foxidrive"  schrieb im Newsbeitrag   
   > news:53573208$0$8093$c3e8da3$3304c218@news.astraweb.com...   
   >   
   > On 23/04/2014 07:34, Daniel wrote:   
   >> The output was :   
   >> "Driver is running."   
   >> if its enabled or   
   >> "Device is disabled."   
   >>   
   >> if not   
   >>   
   >> In the Script the question was , if there is "running" its on an must be   
   >> disabled, if no "running" there, its disabled and must be enabled.   
   >>   
   >   
   > That is what the code is meant to do, and should work if there is no   
   > "running" in the output when it   
   > is disabled.   
   >   
   > Test the sample code below and see if it disables, and then enables, the   
   > wlan.   
   >   
   >   
   > @echo off   
   > devcon disable "*DEV_4236"   
   > pause   
   > devcon status "*DEV_4236" |find /i "running" || devcon  enable "*DEV_4236" &   
   > pause & goto :EOF   
   >   
      
   > That works..   
   >   
      
      
   Then the code I presented in the first reply will/should work.  Did you   
   include the & goto :EOF at   
   the end of each line?   
      
   The batch file is only three lines.   
      
       @echo off   
       devcon status "*DEV_4236" |find /i "running" >nul && devcon disable   
   "*DEV_4236" & goto :EOF   
       devcon status "*DEV_4236" |find /i "running" >nul || devcon  enable   
   "*DEV_4236" & goto :EOF   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)