From: cwo4mann@comcast.net   
      
   "Daniel Berger"  wrote in message   
   news:6e613a32.0309270901.53ff9b7b@posting.google.com...   
   > Hi all,   
   >   
   > I admit it - I suck at burning ISO images on Windows.  I burnt Max 2   
   > under BeOS no problem.  Now I no longer have a BeOS partition (new   
   > computer), so that's not an option.   
   >   
   > Anyway, I *do* have Roxio's Easy CD Creator 5 (with latest updates).   
   > Here's what I've tried so far:   
   >   
   > File -> New CD Project -> Bootable CD   
   >   
   > I then selected floppy 1.44 emulation, and used "floppycd.img" as the   
   > image.  I then added the BeOS5PEMaxEditionV3.img file.  It burned   
   > fine.   
   >   
   > I then tried to boot the CD in my laptop (Compaq Presario 700Z, S3   
   > video card).  All I get is a blinking cursor in the upper left corner.   
   >  I was unable to boot into safe mode.   
   >   
   > I also tried booting from a floppy, and got "NTLDR is missing".   
   >   
   > Any and all help appreciated.   
   >   
   > Regards,   
   >   
   > Dan   
      
   Hi Dan,   
      
   Try using the option to burn an ISO disk (the entire MaxBeos ISO).  Then   
   select boot from CD in your PC's BiOS.  MaxBeos should install.  At least   
   that is how I did it after downloading the image.   
      
   Good Luck and let us know how it goes,   
      
   Dave   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)