XPost: alt.os.linux.mint, alt.os.linux.mageia   
   From: pinnerite@gmail.com   
      
   On Sat, 15 Jun 2024 19:44:38 -0400   
   Paul  wrote:   
      
   > On 6/15/2024 1:23 PM, pinnerite wrote:   
   > > This is a summary of where I amm now.   
   > >   
   > > The share section in smb.conf on 192.168.1.100   
   > >   
   > > [data]   
   > >     comment = data   
   > >     path = /home/Data   
   > >     valid users = alan   
   > >     admin users = alan   
   > >     read only = No   
   > >   
   > > The target drive is 192.168.1.4   
   > > I am trying to mount it on /spare/albury/Data.   
   > >   
   > > This is the mount command:   
   > >   
   > > sudo mount -t cifs //192.168.1.4/data/  /spare/albury/Data --verbose -o   
   > > rw,noperm,username=alan,password=conte55a,domain=ASANDCO,vers=1.0,uid=alan   
   > >   
   > > The above should all be one line.  It returns:   
   > >   
   > > mount error(6): No such device or address   
   > >   
   > > It is unclear which device or address.   
   > >   
   > > I have read through the man page for cifs. That added nothing to what I   
   already knew.   
   > >   
   > > $ smbclient -L //192.168.1.100 alan    ## Displays all the shares correctly   
   > >   
   > > I cannot think of anything else to try. :(   
   > >   
   > >   
   > >   
   > > Linux Mint 21.3 kernel version 5.15.0-112-generic Cinnamon 6.0.4   
   > > AMD Ryzen 7 7700, Radeon RX 6600, 32GB DDR5, 1TB SSD, 2TB Barracuda   
   > >   
   >   
   > I tested here on LM213TST and it worked.   
   >   
   > Note that in my case, it did not accept the passage of an inline password,   
   > and insisted I type the password into the terminal. This could have   
   consequences   
   > if buried in a script, such as you might be doing. I would recommend   
   switching   
   > the syntax, to the syntax that uses a file containing USER and PASS   
   information.   
   >   
   > But just for the sake of showing, "something works", which is ultra-important   
   > with SAMBA issues, here goes...   
   >   
   > bullwinkle@LM213TST:~$ sudo mkdir /mnt/sharemount   
   >   
   > bullwinkle@LM213TST:~$ sudo mount -t cifs //192.168.2.102/ramdrive   
   /mnt/sharemount --verbose -o rw,noperm,username=bullwinkle,domai   
   =WORKGROUP,vers=1.0,uid=bullwinkle   
   >   
   >    Password for bullwinkle@//192.168.2.102/ramdrive:   
   >    mount.cifs kernel mount options: ip=192.168.2.102,unc=\\192   
   168.2.102\ramdrive,noperm,vers=1.0,uid=1000,user=bullwinkle,doma   
   n=WORKGROUP,pass=ZZZZZ   
   >   
   > Listing the contents of /mnt/sharemount now, contained the remote content.   
   >   
   > bullwinkle@LM213TST:~$ sudo umount /mnt/sharemount     # clean up later   
   >   
   > I see two friction-points, considering yours used to work before.   
   >   
   > 1) Your workgroup details changed or are different on the two machines.   
   >    Check the declaration in /etc/samba/smb.conf   
   >   
   > 2) The password behavior I observed, needs to be corrected.   
   >    Try passing credentials by indirection (use the file with the USER and   
   PASS info in it).   
   >    It's like it was slapping my fingers.   
   >   
   >    I passed this:   
   >   
   >        username=bullwinkle,password=something   
   >   
   >    and the response I get is   
   >   
   >        Enter the password for bullwinkle, you twit   
   >   
   > Which means it is warning me of the security implications of putting   
   > the password in the script. The perms on the credential file can be   
   > 600, to make the thing feel better about itself.   
   >   
   >    Paul   
   >   
   >   
      
   I tried what you suggested but I still get mount error (6)   
      
   I appreciate your efforts though.   
      
      Alan   
      
   --   
   Linux Mint 21.3 kernel version 5.15.0-112-generic Cinnamon 6.0.4   
   AMD Ryzen 7 7700, Radeon RX 6600, 32GB DDR5, 1TB SSD, 2TB Barracuda   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)