XPost: alt.os.linux.mint, alt.os.linux.mageia, uk.d-i-y   
   From: tnp@invalid.invalid   
      
   On 09/10/2024 10:52, Paul wrote:   
   > On Tue, 10/8/2024 4:05 PM, pinnerite wrote:   
   >> I have a Gigabyte miniATX motherboard with 4 SATA HDD sockets.   
   >> I wondered if I could replace the hard drive with an M.2 SSD   
   >> provided I could find some kind of adapter.   
   >>   
   >> There appear to be loads of devices advertised but I cannot be sure   
   >> that they would fulfill my need.   
   >>   
   >> Has anyone tried this?   
   >>   
   >> TIA   
   >>   
   >> Alan   
   >   
   > Presumably there is a reason for this adventure ?   
   >   
   > Was the hard drive being naughty ?   
   >   
   > Just a plain old SATAIII SSD 2.5" drive (like you might   
   > use in a laptop), can run at a SATA III rate. Because you   
   > didn't name the motherboard model number, we can't guess   
   > what controller is in there. Nor for that matter, how   
   > spiffy your PCIe slots are. Your motherboard could be a   
   > 9.6" x 9.6" microATX (full size ATX is 12" high).   
   >   
   > $ inxi -F   
   > Machine:   
   >    Type: Desktop Mobo: Micro-Star model: MPG B550 GAMING PLUS (MS-7C56) v:   
   1.0   
   >      v: 1.I0  date: 07/13/2024   
   > CPU:   
   >    Info: 8-core model: AMD Ryzen 7 5700G  bits: 64  type: MT MCP cache: L2:   
   4 MiB   
   > Drives:   
   >    ID-1: /dev/sda vendor: Samsung model: SSD 870 EVO 4TB size: 3.64 TiB     
   <=== boot drive   
   >   
   > When it comes to measuring them, computers are particularly clever.   
   > For example, this machine has invariant RDTSC and yet speed measurement   
   > of disks does not agree when performed by two different OSes.   
   > This is captured on a Zen3 B550 system (Asmedia Southbridge).   
   >   
   >     [Picture]  Comparison of benchmarks of SATA SSDs on LM213 and Windows   
   >   
   >      https://i.postimg.cc/nrkVdbVn/munchkin-racing.gif   
   >   
   > The only thing I have against NVMe, is the installation is a   
   > bit fiddly, the screw is a nuisance. I own just one sample NVMe   
   > and most of the time, it sits in the little cardboard box.   
   >   
   > It would be nice, if they used good flash in SSDs, but that's never going   
   > to happen. SLC, MLC, (TLC,QLC,PLC) the downward descent continues.   
   > Bog roll for the win.   
   >   
   > You can see in the bench picture, the drive at the bottom was   
   > bought as an "experiment in cheapness". And the error corrector   
   > can only manage about 285 MB/sec or so. The sectors aren't being   
   > spared out, and while re-writing them might be fun, it might not   
   > achieve the desired result. I wanted to see if the cheap drive   
   > behaved like my bad USB flash sticks or not.   
   >   
   > You have to decide whether this storage device is to be bootable, or not.   
   >   
   >     Paul   
   Ive used SATA style SSDs and they are a lot faster than spinning rust.   
      
   Just how fast does a disk need to be?   
      
   --   
   "It is an established fact to 97% confidence limits that left wing   
   conspirators see right wing conspiracies everywhere"   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)