From: nospam@needed.invalid   
      
   On Sun, 12/21/2025 2:44 AM, Harvey Sanenbum wrote:   
   > With my Ubuntu system, I have a storage NTFS SSD that is always auto mounted   
   and ready to use once my PC is booted up.  However, after a recent power   
   outage, it no longer auto mounts and I have to go into discs utility and turn   
   it on manually.  Once    
   that is done, it works fine.   
   >   
   > The message I get when I try to access it before doing the aforementioned is   
   "Unable to find "/media/harvey/2B1dB185A6E8SE". Please check the spelling and   
   try again."  I'm not positive, but the power drop caused a change in the   
   drive's ID as I believe    
   it always showed with something a lot shorter than the above.   
   >   
   > So, how do I get the original behavior back (which is auto mount and ready   
   to go once system has booted)?   
   >   
   > Thank you.   
      
   https://web.archive.org/web/20240212081438/help.ubuntu.com/commu   
   ity/AutomaticallyMountPartitions   
      
      Per-User Mounts   
      
      udisks   
      
      This is the modern replacement for gnome-mount. It's not gnome specific.   
      
      When you mount a disc normally with the file browser (nautilus etc)   
      it mounts disks by interacting with udisks behind the scenes.   
      
      /usr/bin/udisks --mount /dev/sdb1   
      
      *******   
      
      ls -al /dev/disk/by-uuid/                                       # get the   
   identifier   
      
      udisksctl mount --block-device /dev/disk/by-uuid/1313-F422>     # Add the   
   new partition   
      
      ...   
      
      Adding to startup   
      
       From the Ubuntu dash (click logo in top left) find startup applications or   
   press Alt+F2 and type   
      
           gnome-session-properties   
      
       Push the Add button.   
      
       Choose a name, paste in your command and push the Add button    # Paste in   
   the command that works.   
      
   *******   
      https://askubuntu.com/questions/303694/where-is-startup-appli   
   ations-user-config-file-for-disabled-and-enabled-applic   
      
          ~/.config/gnome-session/saved-session   
          ~/.config/autostart   
      
   *****************************   
      
   The pattern suggests, that you did the udiskctl-like form, and some   
   identifier has changed. Verify the identifiers and correct the situation.   
      
   I've never done anything like this. Should be interesting :-)   
      
       Paul   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)