From: nospam@needed.invalid   
      
   On Wed, 8/6/2025 10:01 AM, yossarian wrote:   
   > Hi all   
   > How do you control the fan speed on your GPU? I installed a new   
   > graphics card (RX9060XT) and the fan only starts at 60 C. I think   
   > that's too high. I would like it to run constantly at a low speed. Any   
   > suggestions?   
   >   
   >   
      
   There is a mention here, of some variable names not being correct   
   for talking to the interface.   
      
   https://discussion.fedoraproject.org/t/radeon-9060xt-fan-not-ope   
   ating-under-load/158524/12   
      
      "My educated guess would be changing the path names in /usr/l   
   cal/bin/amdgpu-fancontrol.   
      
       The file was still using pwm1_max and pwm1_min, but the system exposes   
   fan1_max and fan1_min.   
      
       E.G: PWMMAX=$(cat /sys/class/drm/card$CARDNUM/device/hwmon/$   
   HWMONID}/pwm1_max)   
   ==>   
            PWMMAX=$(cat /sys/class/drm/card$CARDNUM/device/hwmon/$   
   HWMONID}/fan1_max)   
      "   
      
     Paul   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)