From: nospam@needed.invalid   
      
   On Mon, 9/8/2025 3:31 PM, pinnerite wrote:   
   > When I have a source open, whether a video on a browser or a recording   
   > or live broadcast from Mythtv, the volume is too low. When I open the   
   > Pulseaudio volume control, the default settings appear to be 100%. i   
   > need something like 133%.   
   >   
   > I can move the slider but it doesn't stay. Is there somewhere that I   
   > can change the default?   
   >   
      
   If you run "alsamixer", it shows just one control for volume.   
      
   That's because the device selection is set to "Default".   
      
   If the device selection is set to RealTek, you can get   
   more of the old ALSA mixer. I have to make the panel wider, to   
   see all of them.   
      
      [Picture]   
      
       https://i.postimg.cc/QNKTqzdq/LM222-Audio-Controls.gif   
      
   There is a Line Boost, but it is unclear whether that is   
   LineIN or LineOUT.   
      
   I think the controls used to be "Master" and "PCM", but my   
   "PCM" is already 100% and so some other control will be   
   needed to provide more boost than that. The HDAudio has gain   
   blocks in it, so it should be able to compensate for the   
   Hollywood -15dB problem.   
      
     Paul   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)