From: karl.dalen21@gmail.com   
      
   Just an update, I finally managed to get Mageia installed and boot from   
   the HD. In addition to the "Secure Boot" and UEFI disabled and CSM legacy boot   
   enabled I also changed SATA mode from IDE to AHCI and disabled   
   "S.M.A.R.T status check"   
   After a new install in that mode it booted up nicely. Thanks a lot for all   
   the help. I think I have reinstalled the OS about 6 times to reach this level.   
   A part from that issue everything seemed to work (LAN/Audio/Graphics).   
   I will send out a list of all settings later on the mageia news group.   
   By the way is the standard Intel 810 graphics driver good enough for   
   the GPU in i3/3220 (HD Graphics 2500) or are there better drivers ?   
      
   Another question, Is there a file in MD 2010 where I can find all packages   
   installed? Since I have the root partition from Md2010 on an old PATA drive   
   available as a PATA-to-USB drive it would be an easy way to see what packages   
   I need to install to get back to a similar state as my MD 2010 environment   
      
   Regards,   
      
   /Karl   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)