a788871d   
   From: aragorn@chatfactory.invalid   
      
   unixbhaskar wrote:   
      
   > Inspite of doing and bluntly following the gentoo.org doc.I have   
   > compaq-presario v3000 laptop.Which have RHEL5,openSUEE,Ubuntu in other   
   > slices.None of them giving trouble.But why it stuck at boot I am not   
   > able to figure it out.I have read quite a lot in the Gentoo   
   > forums ,Applied lot of thing according to my architechture ,but   
   > nothing help.   
   >   
   > Any help would be greatly appreciated.   
   > Thanks   
   > Bhaskar   
      
   Well, you could start by telling us what you see on the screen when you say   
   "it gets stuck at boot".  We need the error messages verbatim in order to   
   know what's wrong. :-)   
      
   A first preliminary guess would be that you've configured the kernel wrongly   
   and forgot to include the drivers for your hard disk or something similar,   
   or perhaps you've made those modules and you're not booting with   
   an /initrd.../   
      
   If you want to boot without an /initrd,/ then your kernel *must* have the   
   drivers for your hard disk - I'm presuming PATA (IDE) or SATA - into the   
   kernel image itself, and not as loadable modules.  In order to load a   
   module, the kernel must have access to the disk, and without the driver for   
   your disk, it cannot load any modules.  In other words, it's a   
   chicken-and-egg problem... ;-)   
      
   --   
   Aragorn   
   (registered GNU/Linux user #223157)   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)