From: cestjihef@free.fr   
      
   jf wrote:   
      
   > jf wrote:   
   >   
   >> my remote is a realmagic , the receiver is plugged on the serial port.   
   >> And that is the way I used it before, and also the way it works on the   
   >> ubuntu distro   
   >   
   > I'm not far : now, when I run lircd, it says :   
   > lircd: lircd(pixelview) ready, using /var/run/lirc/lircd   
   >   
   > Then I run irw /var/run/lirc/lircd , and I get :   
   > pcjf jf # irw /var/run/lirc/lircd   
   > 0000000018362d8b 00 1 REALmagic   
   > 0000000018362d8b 01 1 REALmagic   
   > 0000000018312c4b 00 2 REALmagic   
   > 0000000018312c4b 01 2 REALmagic   
   > 000000001831ac6b 00 3 REALmagic   
   > 000000001831ac6b 01 3 REALmagic   
   > ^C   
   >   
   > when I press the 1,2,3 buttons :)   
   > But vdr --rcu=/var/run/lirc/lircd can't is not accepted as a lircd client   
   > I'll try to find some help in vdr groups.   
   > Thanks again for your help :)   
   > regards,   
   > jf   
   It's OK now : vdr --lirc=/var/run/lirc/lircd makes it work :)   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)