From: KingBeowulf@none.none   
      
   On Sat, 29 Mar 2025 22:35:36 -0400, bad sector wrote:   
      
   > At first I just migrated the entire partition to the new box which   
   > worked with some distros, but when that didn't work here I did a new   
   > install. That don't work either. Is there anything I can do during a   
   > reinstall to fix this? Is the problem a too-recent GPU (I mean I have NO   
   > clue!).   
   >   
   >   
   > (EE) open /dev/dri/card0: nmop such file or directory (WW) Falling back   
   > to old probe metyhod for modesetting vesa: Refusing to run on UEFI (EE)   
   > Screen 0 deletred because of no matching config section (II)   
   > UnloadModule: "modesetting"   
   > (EE) Device(s) detected, but none matchthose in the config file   
      
   Check lspci to see what gets reported.  I know the AMD RX 6000 series   
   works well on Slackware-15. Using RX 6650 XT and RX 6800 XT currently.  I   
   think the RX 7000 series is too new and requires Slackware-current for   
   the newer amdgpu and firmware.   
      
   -kb   
      
   --- SoupGate-DOS v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)