On Wednesday, June 21, 2017 at 8:38:33 AM UTC+2, Christian Schweingruber wrote:   
   > Hi   
   >   
   > Am 20.06.2017 um 20:00 schrieb andrew.williams@t-online.de:   
   > ...   
   > > Does anyone else use IP Forwarding under 42.2?   
   > sure, every day, without any problem.   
   >   
   > Questions/Hints:   
   > - firewall?   
   > - cat echo /proc/sys/net/ipv4/ip_forward   
   > - routing   
   > - nat?   
   >   
   > greetings chrigu   
   > >   
      
      
   Firewall?  The Internal network is configured as just that.  Masquerading was   
   originally on but I have tried it both ways today.   
      
   cat /proc/sys/net/ipv4/ip_forward ("echo"?) showed up as zero.  I turned IPV4   
   and IPV6 forwarding off and on again (Yast Network Settings) and it was then   
   set to 1.  This could be a bug or it could be a symptom.   
      
   Routing?  As I said originally, fixed IPV4 Addresses on that network and I   
   have the routing on the clients to go through that address.  It works on the   
   Suse 11.x machine which is on the same internal network.   
      
   nat?  I have never configured this.   
      
   I'm obviously doing something wrong but no idea what.  Thanks.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)