From: robin_listas@es.invalid   
      
   On 2018-06-03 22:39, Darklight wrote:   
   > On 03/06/18 15:39, Carlos E.R. wrote:   
   >> On 2018-06-03 16:15, Darklight wrote:   
   >>> Ok motherboard is an asus prime b350-plus using amd ryzen 5 1600   
   >>>   
   >>> windows 8.1 pro and opensuse leap 42.3 both 64 bit installed   
   >>> before bios update.   
   >>>   
   >>> all was running good.   
   >>> I done the bios up date to version 4011 date 19/4/2018   
   >>>   
   >>> i go to boot into opensuse, i get the boot screen select opensuse   
   >>> i see a few lines of text then screen goes black and nothing.   
   >>> So i press reset and boot into windows i get in fine.   
   >>> i go back to opensuse boot screen and select recovery a few lines   
   >>> text then black screen. so i said a reinstall was going to have to be   
   >>> done.   
   >>>   
   >>> 1) I boot from dvd in go to install and same thing black screen.   
   >>> 2) so i try an upgrade and same thing a black screen.   
   >>>   
   >>> i tried uefi with steps 1 and 2 same thing only difference the text   
   >>> stays on screen and pc just hangs there.   
   >>>   
   >>> Ok i said lets do the install from windows, boot into windows start   
   >>> opensuse dvd, it does its thing and then says restart pc.   
   >>> so i restart pc select opensuse and i can boot into opensuse.   
   >>> log out go back into windows and uninstall opensuse install loader   
   >>> thinking, i would not be able to get into opensuse. So i restart pc get   
   >>> to boot screen select opensuse and i can get into opensuse, i done a few   
   >>> restarts. ie back and forth from windows to opensuse, and no problem.   
   >>>   
   >>> Can some one tell me what went on, plus this is a fyi if you do an   
   >>> update and get or have the same problems as me.   
   >>   
   >>   
   >> I suggest you ask at opensuse mail list or web forum. More readers, some   
   >> very knowledgeable.   
   >>   
   >> Did you try disabling secure boot? I had to do that on a machine, after   
   >> an update. The display went black and did not boot. I could not even see   
   >> grub display.   
   >>   
   > secure boot was not enabled windows 8.1 pro does not require uefi so i   
   > can get away with using grub 2.   
      
   Uefi uses grub2 on openSUSE.   
      
      
   --   
   Cheers, Carlos.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)