From: bnacht@web.de   
      
   Am 12.08.19 um 17:40 schrieb Malcolm:   
   > On Mon, 12 Aug 2019 17:24:02 +0200   
   > Bernd  wrote:   
   >   
   >> Hi,   
   >>   
   >> There is a DL360eG8. This host has two HDD at an SmartArray B320i   
   >> (v4.08) (RAID1).   
   >>   
   >> It is possible to Install w2k16 Server, but SLES11 stalls the host.   
   >>   
   >> I insert a USB-Stick with SLES; Boot and choose F10 (Intelligent   
   >> Provisioning). There I choose the SmartArray Controller as 'Install   
   >> Target' and choose SLES as operating system.   
   >>   
   >> But I get the message 'Connect optical or iLO-Medium before proceed'.   
   >> It is the same message even if I use a via iLO connected ISO or if I   
   >> use a URL link to the ISO at a web service.   
   >>   
   >> Any hints to get this running?   
   >>   
   >>   
   >> Bernd   
   > Hi   
   > Did you try F9 for the one time boot? Does it have the internal SD card   
   > for provisioning, AFAIK dump the image there instead....   
   >   
      
   No, I set the 'BIOS' to boot from my install source (boot controller order)   
      
   I assume that 'Intelligent Provisioning' copy the driver for the Smart   
   Array Controller to a known space and then start the Install-Routine   
   from the connected source?!   
      
   Unfortunately I have no physical access to the hardware. Ah ... found a   
   component description ... Yes, it seems that there is a SD-Slot. Did you   
   mention that the installation source should on the SD-Card or additional   
   drivers?   
      
   Bernd   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)