Am Mittwoch, 18. September 2019 13:31:08 UTC+2 schrieb Malcolm:   
   > On Wed, 18 Sep 2019 00:01:39 -0700 (PDT)   
   > amitsis@gmail.com wrote:   
   >    
   > > Am Mittwoch, 18. September 2019 04:18:26 UTC+2 schrieb Malcolm:   
   > > > On Tue, 17 Sep 2019 15:58:39 -0700 (PDT)   
   > > > amitsis@gmail.com wrote:   
   > > >      
   > > > > Am Mittwoch, 18. September 2019 00:04:07 UTC+2 schrieb Carlos   
   > > > > E.R.:     
   > > > > > On 17/09/2019 23.00, amitsis@gmail.com wrote:       
   > > > > > > Hi,   
   > > > > > >    
   > > > > > > How do I prevent my logfile from overflowing when messages   
   > > > > > > from the RTL8821CE radio driver are getting logged?   
   > > > > > >    
   > > > > > > There are such:   
   > > > > > > 2019-09-17T22: 17: 20.349415   02: 00 localhost kernel:   
   > > > > > > [2344.798308] RTW: [HALMAC] [TRACE] mac_pwr_switch_pcie_8821c   
   > > > > > > <=== 2019-09-17T22: 17: 20.349416   02: 00 localhost kernel:   
   > > > > > > [2344.798309] RTW: SetHwReg: bMacPwrCtrlOn = 0 2019-09-17T22:   
   > > > > > > 17: 20.349418   02: 00 localhost kernel: [2344.798311] RTW:   
   > > > > > > rtl8821ce_hal_deinit <== 2019-09-17T22: 17: 20.349419   02: 00   
   > > > > > > localhost kernel: [2344.798313] RTW: <=== rtw_ips_pwr_down   
   > > > > > > ..................... in 0 ms 2019-09-17T22: 17: 24.781628   
   > > > > > > 02: 00 localhost kernel: [2349.232846] RTW:   
   > > > > > > rtw_ndev_notifier_call (wlp3s0) state: 10 2019-09-17T22: 17:   
   > > > > > > 24.781655   02: 00 localhost kernel: [2349.232944] RTW:   
   > > > > > > netdev_close (wlp3s0), bup = 1 2019-09-17T22: 17: 24.781661   
   > > > > > > 02: 00 localhost kernel: [2349.232949] RTW: -871x_drv -   
   > > > > > > drv_close, bup = 1 2019-09-17T22: 17: 24.781664   02: 00   
   > > > > > > localhost kernel: [2349.233066] RTW: rtw_ndev_notifier_call   
   > > > > > > (wlp3s0) state: 2 2019-09-17T22: 17: 24.781667   02: 00   
   > > > > > > localhost kernel: [2349.233820] RTW: cfg80211_rtw_get_txpower   
   > > > > > >    
   > > > > > > Perhaps it should be possible with the help of the log system   
   > > > > > > to restrict this in some way.       
   > > > > >    
   > > > > > On the journal, impossible. You can not apply filters. You can   
   > > > > > make the journal bigger or smaller. The configuration is in   
   > > > > > /etc/systemd/journald.conf   
   > > > > >    
   > > > > >    
   > > > > > If, however, you are using syslog, then you can apply filters.   
   > > > > > First you have to find out what syslog you are using, and if you   
   > > > > > are using syslog.   
   > > > > >    
   > > > > >    
   > > > > >        
   > > > > > > I would not want to make any changes to the driver itself!       
   > > > > >    
   > > > > > Maybe there is a reason why it is making so many entries.   
   > > > > >    
   > > > > > --    
   > > > > > Cheers, Carlos.       
   > > > >    
   > > > > I recompiled the code for this driver several times from the git,   
   > > > > and only two days ago found that the messages had become so   
   > > > > numerous, and I can not stop that in any way if the driver's   
   > > > > networking module is running from this new kernel.   
   > > > >    
   > > > > Thus It must have to do something with the driver's module or the   
   > > > > kernel!   
   > > > >    
   > > > > Andreas     
   > > > Hi   
   > > > If you run the command;   
   > > >    
   > > > systool -vm    
   > > >    
   > > > In the parameters output is the a debug_mask option and if so what   
   > > > is the value?   
   > > >    
   > > > Maybe this has been turned on during compile and needs tweaking to   
   > > > disable, or set a module parameter value to turn off/reduce.   
   > > >    
   > > > --    
   > > > Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)   
   > > > Tumbleweed 20190916 | GNOME Shell 3.32.2 | 5.2.14-1-default   
   > > > Intel DQ77MK MB | Xeon E3-1245 V2 X8 @ 3.40 GHz | Intel/Nvidia   
   > > > up 10:25, 2 users, load average: 2.88, 2.20, 1.43     
   > >    
   > > Actually there is no such entry since systool will yield the   
   > > following:   
   > >    
   > > ~$ systool -vm cfg80211   
   > > Module = "cfg80211"   
   > >    
   > >   Attributes:   
   > >     coresize            = "823296"   
   > >     initsize            = "0"   
   > >     initstate           = "live"   
   > >     refcnt              = "1"   
   > >     srcversion          = "861372AFB25869FC9C8B289"   
   > >     taint               = ""   
   > >     uevent              =    
   > >    
   > >   Parameters:   
   > >     bss_entries_limit   = "1000"   
   > >     cfg80211_disable_40mhz_24ghz= "N"   
   > >     ieee80211_regdom    = "00"   
   > >    
   > >   Sections:   
   > > ~$   
   > >    
   > > cheers,   
   > > Andreas   
   > Hi   
   > That's not the kernel module (driver) for the card...  that's one of the   
   > support modules, why would you recompile this?   
   >    
   > I would expect it to be one of realtek modules under;   
   >    
   > ls /lib/modules/`uname -r`/kernel/drivers/net/wireless/realtek   
   >    
   > --    
   > Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)   
   > Tumbleweed 20190916 | GNOME Shell 3.32.2 | 5.2.14-1-default   
   > Intel DQ77MK MB | Xeon E3-1245 V2 X8 @ 3.40 GHz | Intel/Nvidia   
   > up 19:33, 2 users, load average: 0.45, 0.93, 0.90   
      
   /lib/modules/5.2.14-1-default/kernel/drivers/net/wireless/realtek$ find .   
   -type f   
   ./rtl818x/rtl8180/rtl818x_pci.ko   
   ./rtl818x/rtl8187/rtl8187.ko   
   ./rtl8xxxu/rtl8xxxu.ko   
   ./rtlwifi/btcoexist/btcoexist.ko   
   ./rtlwifi/rtl8188ee/rtl8188ee.ko   
   ./rtlwifi/rtl8192c/rtl8192c-common.ko   
   ./rtlwifi/rtl8192ce/rtl8192ce.ko   
   ./rtlwifi/rtl8192cu/rtl8192cu.ko   
   ./rtlwifi/rtl8192de/rtl8192de.ko   
   ./rtlwifi/rtl8192ee/rtl8192ee.ko   
   ./rtlwifi/rtl8192se/rtl8192se.ko   
   ./rtlwifi/rtl8723ae/rtl8723ae.ko   
   ./rtlwifi/rtl8723be/rtl8723be.ko   
   ./rtlwifi/rtl8723com/rtl8723-common.ko   
   ./rtlwifi/rtl8821ae/rtl8821ae.ko   
   ./rtlwifi/rtl_pci.ko   
   ./rtlwifi/rtl_usb.ko   
   ./rtlwifi/rtlwifi.ko   
   ./rtw88/rtw88.ko   
   ./rtw88/rtwpci.ko   
      
   and there are no such modules there? But 'lsmod | grep 8821' yields:    
      
   lsmod | grep 80211   
   cfg80211              823296  1 8821ce   
   rfkill                 28672  8 hp_wmi,bluetooth,cfg80211   
      
   And I thus force 'systool -vm 8821ce' which yields:   
   Module = "8821ce"   
      
     Attributes:   
       coresize            = "2490368"   
       initsize            = "0"   
       initstate           = "live"   
       refcnt              = "0"   
       srcversion          = "0FAAE8BA985C1EE690CE616"   
       taint               = "OE"   
       uevent              =    
       version             = "v5.5.2_34066.20190614_COEX20180712-3232"   
      
     Parameters:   
       if2name             = "wlan%d"   
       ifname              = "wlan%d"   
       rtw_FileMaskEfuse   = "0"   
       rtw_GLNA_type       = "0"   
       rtw_OffEfuseMask    = "0"   
       rtw_RFE_type        = "64"   
       rtw_TxBBSwing_2G    = "255"   
       rtw_TxBBSwing_5G    = "255"   
       rtw_adaptivity_en   = "0"   
       rtw_adaptivity_mode = "0"   
       rtw_adaptivity_th_edcca_hl_diff= "0"   
      
   [continued in next message]   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)