Forums before death by AOL, social media and spammers... "We can't have nice things"
|    alt.os.linux.suse    |    Suse is actually not that bad    |    138,051 messages    |
[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]
|    Message 137,014 of 138,051    |
|    Andrew to Carlos E.R.    |
|    Re: Converting the boot mechanism to UEF    |
|    14 Jul 20 09:28:18    |
      From: Doug@hyperspace.vogon.gov              Carlos E.R. wrote:       > On 13/07/2020 14.27, Andrew wrote:       >> Given a Linux-only system running on two discs (SSD and "normal"), I       >> have been trying to work out how to change things to use the UEFI boot       >> mechanism.       >> The SSD ( /dev/sda ) has room to spare, although not at the start of       >> the drive. The system-main partition is also on that drive.       >> The only instructions I have seen are for Debian-based systems.       >> I'm aware that I could do an initial install - re-partitioning the SSD       >> - and that would get me there, is that the only way?       >> The Motherboard is only a couple of years old - as you can guess by       >> the use of SSD - so there are no technical constraints.       >       > As you are posting on the SUSE group, I take it for a given that you are       > using openSUSE Leap or Tumbleweed. Well, it is easy, fire up YaST, boot       > module, change boot method to UEFI. It should propose to create an EFI       > partition (doesn't need to be at the start), but I don't know if this is       > contemplated. So, you have to try.       >       >       >       Thanks, but . . .       I tried it the first time. It told me it needed to install a new       package - which it did - but then told me I had no valid EFI partition.       YaST Partitioner did not want to let me create a new partition (of any       kind) in the unassigned area of the SSD.       Booting a current Gparted, it allowed me to create such a partition.       Booting back into openSUSE 15.1, YaST Partitioner allowed me to set the       partition type to EF and format the beast.       Trying YaST Boot, once again it told me I had no valid EFI partition.       Reboot (some changes to the partition table used to require a reboot)       and trying YaST Boot, once again it told me I had no valid EFI partition.       My new EFI partition is correctly formatted, but empty.              --- SoupGate-Win32 v1.05        * Origin: you cannot sedate... all the things you hate (1:229/2)    |
[   << oldest   |   < older   |   list   |   newer >   |   newest >>   ]
(c) 1994, bbs@darkrealms.ca