From: robin_listas@es.invalid   
      
   On 2024-01-16 22:31, panorain wrote:   
   > On 1/15/24 15:14, Carlos E.R. wrote:   
   >> On 2024-01-15 17:22, panorain wrote:   
   >>> On 1/4/24 15:02, Carlos E.R. wrote:   
   >>>> On 2024-01-04 02:52, panorain wrote:   
   >>   
   >> ...   
      
      
   >>> Is openSUSE Tumbleweed hot plugging enabled by default?   
   >>   
   >> I don't use TW, but I assume it is. It depends on the particular   
   >> desktop you use, I understand.   
   >>   
   >>> Is there a way to see if hot plugging is enabled? The last time the   
   >>> mentioned medium was updated was after usr merge (I think). I do   
   >>> know, the medium has little critical data on it. In the very least it   
   >>> is an interesting experiment to try and mount. I did attach a PS/2   
   >>> keyboard in order to really be certain the LUKS passphrase was being   
   >>> keyed in correctly. I may post this on the mailing list soon. Thanks   
   >>> for your input on this also.   
   >>   
   >> Welcome.   
   >>   
   > Thank you Carlos. Hot pluging allows the drive to be seen on another   
   > desktop. sudo fdisk -l displays the drive as /dev/sdc .Passing the   
   > following: error:Thinkcentre-M57p:~> mount /dev/sdc   
   > mount: /dev/sdc: can't find in /etc/fstab.   
      
   You failed to give a mount point.   
      
   Besides, you are trying to mount the disk, not a partition, and it is   
   encrypted. That's not the device node to supply to the mount command. It   
   will be one of the devices in /dev/mapper/, after you create it with the   
   proper password:   
      
   cryptsetup luksOpen /dev/sdc cr_ARBITRARY_NAME   
      
      
      
   Information:   
      
   blkid /dev/mapper/$CR_NAME   
      
   cryptsetup status $CR_NAME   
      
   dmsetup ls   
      
   --   
   Cheers,   
           Carlos E.R.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)