[continued from previous message]   
      
   sd 0:0:0:0: [sda] Write Protect is off   
   sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't   
   support DPO or FUA   
     sda: sda1 sda2   
   sd 0:0:0:0: [sda] Attached SCSI disk   
   sd 0:0:0:0: Attached scsi generic sg0 type 0   
   ox810sata: OX810 sata core.   
   scsi1 : oxnassata   
   ata2: SATA max UDMA/133 irq 18   
   ata_eh_reset(2207):Sleep 1 sec before any error happens   
   ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)   
   ata_dev_read_id(2037): Give 100ms while getting HW ID   
   ata2.00: qc timeout (cmd 0xec)   
   ox810sata_bmdma_stop - aborting DMA   
   ox810sata aborting DMA.   
   ox810sata sending sync escapes   
   Port 0 High level registers   
      
   [snip long register dump]   
      
   oxnas_dma_dump_registers() - end   
   ox810sata core reset   
   ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)   
   ata2: failed to recover some devices, retrying in 1 secs   
   ata_eh_reset(2207):Sleep 1 sec before any error happens   
   ata_wait_after_reset(3500):msleep(6000);   
   ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)   
   ata_dev_read_id(2037): Give 100ms while getting HW ID   
   ata2.00: qc timeout (cmd 0xec)   
   ox810sata_bmdma_stop - aborting DMA   
   ox810sata aborting DMA.   
   ox810sata sending sync escapes   
   Port 0 High level registers   
      
   [snip long register dump]   
      
   oxnas_dma_dump_registers() - end   
   ox810sata core reset   
   ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)   
   ata2: failed to recover some devices, retrying in 1 secs   
   ata_eh_reset(2207):Sleep 1 sec before any error happens   
   ata_wait_after_reset(3500):msleep(6000);   
   ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)   
   ata_dev_read_id(2037): Give 100ms while getting HW ID   
   ata2.00: qc timeout (cmd 0xec)   
   ox810sata_bmdma_stop - aborting DMA   
   ox810sata aborting DMA.   
   ox810sata sending sync escapes   
   Port 0 High level registers   
      
   [snip long register dump]   
      
   oxnas_dma_dump_registers() - end   
   ox810sata core reset   
   ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)   
   ata2: failed to recover some devices, retrying in 1 secs   
   ata_eh_reset(2207):Sleep 1 sec before any error happens   
   ata_wait_after_reset(3500):msleep(6000);   
   ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)   
      
      
   This is what it looks like on the reboot, when the Seagate disk is   
   already spun up:   
      
      
   ox810sata: OX810 sata core.   
   scsi0 : oxnassata   
   ata1: SATA max UDMA/133 irq 18   
   ata_eh_reset(2207):Sleep 1 sec before any error happens   
   Copy button release   
   ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)   
   ata_dev_read_id(2037): Give 100ms while getting HW ID   
   ata1.00: HPA detected: current 7814037168, native 18446744072933654192   
   ata1.00: ATA-8: TOSHIBA HDWE140, FP2A, max UDMA/100   
   ata1.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 0/32)   
   ata_dev_read_id(2037): Give 100ms while getting HW ID   
   ata1.00: configured for UDMA/100   
   ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xb t4   
   ata1: soft resetting link   
   ata_eh_reset(2207):Sleep 1 sec before any error happens   
   ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)   
   ata_dev_read_id(2037): Give 100ms while getting HW ID   
   ata_dev_read_id(2037): Give 100ms while getting HW ID   
   ata1.00: configured for UDMA/100   
   ata1: EH complete   
   scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA HDWE140  FP2A PQ: 0 ANSI: 5   
   sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).   
   sd 0:0:0:0: [sda] 7814037168 512-byte hardware sectors (4000787 MB)   
   sd 0:0:0:0: [sda] Write Protect is off   
   sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't   
   support DPO or FUA   
   sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).   
   sd 0:0:0:0: [sda] 7814037168 512-byte hardware sectors (4000787 MB)   
   sd 0:0:0:0: [sda] Write Protect is off   
   sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't   
   support DPO or FUA   
     sda: sda1 sda2   
   sd 0:0:0:0: [sda] Attached SCSI disk   
   sd 0:0:0:0: Attached scsi generic sg0 type 0   
   ox810sata: OX810 sata core.   
   scsi1 : oxnassata   
   ata2: SATA max UDMA/133 irq 18   
   ata_eh_reset(2207):Sleep 1 sec before any error happens   
   ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)   
   ata_dev_read_id(2037): Give 100ms while getting HW ID   
   ata2.00: ATA-11: ST8000VN004-2M2101, SC60, max UDMA/133   
   ata2.00: 15628053168 sectors, multi 16: LBA48 NCQ (depth 0/32)   
   ata_dev_read_id(2037): Give 100ms while getting HW ID   
   ata2.00: configured for UDMA/133   
   scsi 1:0:0:0: Direct-Access     ATA      ST8000VN004-2M21 SC60 PQ: 0 ANSI: 5   
   sd 1:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16).   
   sd 1:0:0:0: [sdb] 15628053168 512-byte hardware sectors (8001563 MB)   
   sd 1:0:0:0: [sdb] Write Protect is off   
   sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't   
   support DPO or FUA   
   sd 1:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16).   
   sd 1:0:0:0: [sdb] 15628053168 512-byte hardware sectors (8001563 MB)   
   sd 1:0:0:0: [sdb] Write Protect is off   
   sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't   
   support DPO or FUA   
     sdb: sdb1 sdb2   
   sd 1:0:0:0: [sdb] Attached SCSI disk   
   sd 1:0:0:0: Attached scsi generic sg1 type 0   
      
   --   
      
   Fake news kills!   
      
   I may be contacted via the contact address given on my website:   
   www.macfh.co.uk   
      
   --- SoupGate-DOS v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)