From: TooMuchSpam@hotmail.com   
      
   On Mon, 19 Jul 2004 06:10:49 GMT, Danno  wrote:   
   >   
   >   Hi there,   
   >   I have an old 486dx2-33 with 4M RAM that I am trying to get Win95 onto.   
   I've   
      
     Thanks for all the advice, took a combination of things to make it work.   
   Had to boot and format with MaxblastPro1.2* in the laptop, sys it with DOS6.21,   
   install DOS in the desktop through the 2.5"->3.5" converter, boot a live Linux   
   CD in the desktop, copy down the CAB files, reboot in the laptop, run setup   
   and let it scandisk & "fix" the hdd then fail (due to low ram), drop back into   
   the desktop and run setup, then when it failed there, dropped it back into the   
   laptop a final time... . It appeared the "big trick" was repartitioning   
   the drive to use slightly less than the 2167M available.   
     Thanks again.   
      
   --   
   Solar-powered Linux: Slackware9.1   2.4.26   IBM ThinkPad560   
   1993 BRC Banzai w/60T Real Chainring & Shimano Deore XT   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)