From: suckoff@abuse.com   
      
   ok after following like 5 different how-tos i have a problem   
      
   The machine is about 2 years old, runs SCO/Unix 5.05,   
      
   the modem use to be attached to a digiboard, but is now on COM1, their are   
   no irq conflicts, using "cu -ltty1a dir" i can communicate with the modem   
   just fine.   
      
   the modem is for dial-in connections.   
      
   When i do an enable tty1A, the configuration is updated everything looks   
   good, but the modem will not complete the handshake almost as if the   
   register in the modem is not set right(which it is set at like 45 seconds   
   for completing the handshake) but then for some reason the modem goes H0 and   
   drops the call mid handshake.   
      
      
   any ideas?   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)