Finally got my first experience using a slide hammer this past weekend.  Was
replacing the other CV axle on the passenger side of my Monte Carlo and was
unable to pull the axle out of the transmission using my own tools.

Ran to the store and got the slide hammer with axle puller end and a few
whacks and the axle came out.  

My 2002 Monte Carlo now has two new CV axles on the front end.  My next
project is painting the calipers on the Monte and 2012 Charger and replacing
all rotors and pads on both.  Also doing new brakes on the 2001 Durango.

Been a busy few months working in Mark's Garage.. :)

- Mark
  
--- WWIVToss v.1.51 
 * Origin:  http://www.weather-station.org * Bel Air, MD -USA (1:261/1304.0)