MSGID: 2:222/2.0 f242ffcc
REPLY: 1:282/1031.0 a6420d9c
TZUTC: 0200
CHARSET: LATIN-1
> This round of polling continued until I seen it happening and issued
> the command 'bbbs bom d 1:14/5'.

> 190312 07:34 Region 14 IP Server, 1:14/5
> 190312 07:34   AKA: 1:14/0

Polling loop can happen if:

1) You have crashmail to nodenumber X, but remote doesn't present that
nodenumber as primary / AKA.

2) Mail session is not fully completed and that poll message still exists.

If your above "bbbs bom d 1:14/5" helps then it's not case #1, as primary is
1:14/5.

Unfortunately BBBS doesn't log enough to see if it's case #2. Can you get
debug logs from remote site? Does it disconnect incoming connection for some
reason?

--- BBBS/Li6 v4.10 Toy-4
 * Origin: * BCG-Box, On The Air Since 11th February 1987! * (2:222/2)
SEEN-BY: 1/19 15/0 2 16/0 19/36 34/999 90/1 104/57 116/18 120/331
SEEN-BY: 123/130 131 140 1970 128/2 153/7715 203/0 218/700 220/60
SEEN-BY: 221/0 1 6 360 222/2 226/17 229/107 426 452 1014 230/0 150
SEEN-BY: 230/152 240/1120 5832 249/206 317 250/1 261/38 100 266/512
SEEN-BY: 267/155 275/100 280/464 5003 282/1031 1056 291/1 111 292/140
SEEN-BY: 292/854 8125 317/3 320/119 219 322/757 335/364 340/400 342/13
SEEN-BY: 342/200 393/68 396/45 640/1384 712/848 801/161 189 3634/12
SEEN-BY: 5020/1042
PATH: 222/2 261/38 320/219 221/1 292/854 229/426