MSGID: 1:282/1031.0 f7d89ff6
REPLY: 3:770/100 92eafc87
TZUTC: -0600
CHARSET: PC-8
Hello Paul.


> [snip]
> From: nristen
> To: Avon
> Subj: Re: Galactic Dynasty
> Date: 03/30/19 13:05
> Base: FSX_GEN
> @TID: Mystic BBS 1.12 A42
> @MSGID: 21:1/161 2ea3e523
> @REPLY: 21:1/101 5356aee7
> @TZUTC: -0400
> @SEEN-BY: 1/1 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115
> @SEEN-BY: 116 117 118 119 120 121 122 123 124 125 127 128 129 130 131 133 134
> @SEEN-BY: 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151
> @SEEN-BY: 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168
> @SEEN-BY: 169 171 172 173 174 175 176 177 178 179 181 182 183 184 185 186 187
> @SEEN-BY: 188 189 190 191 192 193 195 197 199 200 999 2/100 3/100 4/100

The problem as I see it is that the net needs to be specified at the beginning
of each line to indicate which net the following nodes belong in. Until a new
or different net is specified. The same principle is true and used in the
setup of many pieces of FTN software.

I would surmise that the Seen-By lines are not looked at as one continuous
line but as separate sequential lines. And therefor the net specification
would need to be specified at the beginning of each line.


Jeff

--- BBBS/Li6 v4.10 Toy-4
 * Origin: Fidoneet: The Ouija Board - Anoka, MN -bbs.ouijabrd.net (1:282/1031)
SEEN-BY: 1/120 14/5 15/0 2 18/0 19/36 34/999 90/1 103/705 104/57 116/18
SEEN-BY: 116/116 120/331 123/0 25 50 140 150 755 1970 128/2 135/300
SEEN-BY: 153/7715 154/10 20 30 40 700 203/0 218/700 220/60 221/0 6
SEEN-BY: 222/2 226/17 227/201 400 229/107 354 426 452 1014 230/150
SEEN-BY: 230/152 240/1120 5832 249/206 317 250/1 261/38 100 266/512
SEEN-BY: 267/155 275/100 280/464 5003 282/1031 1056 288/34 291/1 111
SEEN-BY: 292/624 854 298/25 26 317/3 320/119 219 322/757 340/400 800
SEEN-BY: 342/13 200 393/68 396/45 423/120 712/848 770/1 801/161 189
SEEN-BY: 2452/250 3634/0 12 15 27 50 119 5020/1042
PATH: 282/1031 261/38 3634/12 154/10 280/464 229/426