TID: Mystic BBS 1.12 A43
MSGID: 3:770/100 cebb7442
REPLY: 1:282/1031.0 f7d89ff6
TZUTC: 1300
On 01 Apr 2019 at 12:09a, Jeff Smith pondered and said...
 
 JS> The problem as I see it is that the net needs to be specified at the
 JS> beginning of each line to indicate which net the following nodes belong
 JS> in. Until a new or different net is specified. The same principle is
 JS> true and used in the setup of many pieces of FTN software.
 JS> 
 JS> I would surmise that the Seen-By lines are not looked at as one
 JS> continuous line but as separate sequential lines. And therefor the net
 JS> specification would need to be specified at the beginning of each line.

Hi Jeff

Yes Mark has basically said the same thing.

I have sought clarification in the FTSC echo in an attempt to find some
documentation that confirms this. Perhaps it's a case of some FTN software
looks for this whilst others do not?

Best, Paul

--- E:avon@bbs.nz ------ W:bbs.nz ---
--- K:keybase.io/avon --------------

--- Mystic BBS v1.12 A43 2019/03/03 (Windows/32)
 * Origin: Agency BBS | Dunedin, New Zealand | agency.bbs.nz (3:770/100)
SEEN-BY: 15/2 57/0 103/705 123/1970 153/250 154/10 203/0 221/0 226/17
SEEN-BY: 226/100 229/107 354 426 452 1014 240/5832 249/206 317 267/800
SEEN-BY: 280/464 5003 292/624 854 317/2 3 322/757 342/200 393/68 396/45
SEEN-BY: 423/120 712/848 770/0 1 10 100 330 340 772/0 1 500 2452/250
PATH: 770/100 1 280/464 229/426