TZUTC: -0600
MSGID: 11071.bbs_carn@1:103/705 27ec8a74
REPLY: 1:340/1101 012b1e1c
PID: Synchronet 3.19b-Win32 master/a2a9dc027 Jan  2 2022 MSC 1928
TID: SBBSecho 3.20-Linux v320a_dev/66be347d4 Nov 29 2022 GCC 12.2.0
BBSID: VERT
CHRS: ASCII 1
  To: Martin Kazmaier
  Re: FTelnet Y-Modem G
  By: Martin Kazmaier to All on Mon Nov 28 2022 07:43 pm

 > Is there a reliable way to send from ftelnet to a fossil y-modem BBS
 > Protocol? I'm trying the latest ftelnet snippit from ftelnet.ca and the
 > prototype fdsz dated 04-29-97 using the dsz -g (though not documented
 > in fdsz) command with rb and sb.  I still get an error that G is expected,
 > but not received from the ftelnet ymodem upload window.  I've been able to
 > transfer from fdsz through olms2000 to ftelnet successfully using y-modem.
 > I haven't tried transfering from ftelnet to fdsz successfully.  I'm running
 > EleBBS, but any protocols for any bbs that use fossil drivers are
 > acceptable.
 >
 > Thanks!  Hopefully I supplied enough information.  If it matters, I'm
 > running

sexyz will send ymodemg with ftelnet.

fdsz is scaled down and i dont think it does that other stuff.
i ran fdsz in dosbox and it says -g is bad command
also is 'rb and sb' a typo?
--- SBBSecho 3.20-Linux
 * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)
SEEN-BY: 1/123 15/0 18/200 90/1 103/705 105/81 106/201 114/705 120/340
SEEN-BY: 123/120 131 124/5016 129/305 153/757 7715 154/10 203/0 218/700
SEEN-BY: 218/840 220/70 221/0 1 6 360 226/17 30 100 227/114 229/110
SEEN-BY: 229/111 112 113 114 206 275 317 400 424 426 428 452 470 550
SEEN-BY: 229/664 700 230/0 240/1120 5832 250/5 8 266/512 267/800 280/464
SEEN-BY: 280/5003 282/1038 292/8125 298/25 301/1 305/3 317/3 320/219
SEEN-BY: 322/757 335/364 341/66 234 342/200 396/45 423/81 460/58 633/280
SEEN-BY: 712/848 770/1 4500/1
PATH: 103/705 280/464 221/1 6 218/840 770/1 317/3 229/426