REPLY: 1:105/10 63b45c06
MSGID: 2:310/31 63b487d9
CHRS: LATIN-1 2
TZUTC: 0100
TID: hpt/lnx 1.9.0-cur 2019-01-08
Hi Rick!

03 Jan 2023 08:46, from Rick Smith -> Richard Menedetter:

 RM>> Check with the guy on the other side.
 RM>> It seems to be his problem, not yours.
 RS> I am the other guy, I run that hub its here on my network... Well so
 RS> if its the hub ill start looking there.

Well that makes it very easy ;)
Check the firewall logs, check that you can ping that host.
Check that binkd is running and listening on the port that you think it should.
Start up tcpdump and check what packets are exchanged.

If both are behind the same NAT router, and you are using the EXTERNAL address
it could be missing NAT loopback.
In that case you can change the config to use internal addresses when trying
to reach the other host.

CU, Ricsi

... A bitch is a girl who will go to bed with anyone, except me.
--- GoldED+/LNX
 * Origin: Ensign, engage warp drive. Ensign? ENSIGN, WAKE UP! (2:310/31)
SEEN-BY: 1/123 15/0 90/1 103/705 105/81 106/201 114/709 120/340 123/131
SEEN-BY: 124/5016 129/305 153/757 7715 154/10 203/0 218/700 221/0
SEEN-BY: 221/1 226/30 227/114 229/110 111 112 113 114 200 206 307
SEEN-BY: 229/317 424 426 428 470 550 664 700 240/1120 5832 266/512
SEEN-BY: 280/464 5003 5555 282/1038 292/789 854 8125 301/1 310/31
SEEN-BY: 317/3 320/219 322/757 335/364 341/66 234 342/200 396/45 410/9
SEEN-BY: 423/120 460/58 633/280 712/848 770/1
PATH: 310/31 280/464 292/854 229/426