REPLY: 2:5020/1042 63bae647
MSGID: 1:105/10 63cd4d3c
CHRS: UTF-8 2
TZUTC: -0800
Greetings Michael!

Sunday January 08 2023 18:34, you wrote to me about an urgent matter!:

 MD>  * Forwarded from area 'BINKD'
 MD> Hello Rick,

 MD> Thursday January 05 2023, Rick Smith wrote to All:

 RS>> I noticed on my new setup (working almost perfectly) that binkd
 RS>> starts to execute my toss command but I get the rc code

 RS>> 05 Jan 06:42:59 [46710] Running nice -n 19 /usr/local/bin/hpt
 RS>> toss afix 05 Jan 06:42:59 [46710] executing `nice -n 19
 RS>> /usr/local/bin/hpt toss afix' 05 Jan 06:42:59 [46710] rc=17664

 MD> 17664=0x4500

 MD> The exit code returned by hpt is the higher byte, that is 0x45.
 MD> Something was wrong. Could you please set the log levels in your hpt
 MD> config: LogLevels   1-90A-Za-z and specify the path to your hpt config
 MD> on the command line: /usr/local/bin/hpt -c /path/to/config toss afix

So rebuilding fixed that mail not tossing from last week on my bbs.  I have
just in last couple of days setup another instance of hpt and it is producing
the exact behavior, not tossing pkt's, same error code reported in binkd.log

22 Jan 06:33:21 [2018] Running /usr/local/bin/mail-toss.sh
- 22 Jan 06:33:21 [2018] executing `/usr/local/bin/mail-toss.sh'
- 22 Jan 06:33:21 [2018] rc=17664

Should I rebuild again.?  This is an exact copy of configs and scripts, both
instances have same paths, etc.


----
Regards,


 Rick Smith (Nitro)

... You know you're hooked when: you consider BBSing better than chocolate
--- GoldED+/LNX 1.1.5-b20220504
 * Origin:  ----> Abacus BBS! --->>>>bbs.abon.us:2323  (1:105/10)
SEEN-BY: 1/123 15/0 90/1 105/7 10 11 44 81 85 500 106/201 114/709
SEEN-BY: 120/340 123/131 129/305 153/7715 218/700 226/30 227/114 229/110
SEEN-BY: 229/111 112 113 114 200 206 307 317 424 426 428 470 550 664
SEEN-BY: 229/700 266/512 282/1038 292/854 317/3 320/219 322/757 342/200
SEEN-BY: 396/45 633/280 712/848
PATH: 105/10 81 229/426