TZUTC: 1000
MSGID: 2153.fdn_binkd@3:633/509 2d2e9a63
REPLY: 4:900/733 68c946be
PID: Synchronet 3.21a-Linux master/7276d373a Jun 01 2025 GCC 10.2.1
TID: SBBSecho 3.27-Linux master/7276d373a Jun 01 2025 GCC 10.2.1
COLS: 80
BBSID: ALTERANT
CHRS: ASCII 1
FORMAT: flowed
NOTE: FSEditor.js v1.105
  Re: How to add an additional network?
  By: JAS to All on Tue Sep 16 2025 08:00 am

Howdy,

 > domain fidonet /var/spool/ftn/outb 4 binkp.net
 > domain fsxnet  /var/spool/ftn/outb 21 fsxnet.nz
 > address 4:900/733@fidonet
 > address 21:x/y00.z@fsxnet

Maybe try without the domain name at the end of the "domain" statements.

Also, the "zone" ID (4,21) on the "domain" lines are not the zone's of the
othernets, but it indicate what "zone" is your *primary* domain.

This needs to be consistent with your mail tosser.

If your mail tosser is putting fsxnet mail in /var/spool/ftn/outb.015, then
you need to change binkd's configuration to have "4" for the fsxnet domain,
not 21. (Assuming hpt is treating your "fidonet" AKA as your *primary* AKA -
and thus it is packaging your fidonet mail to "/var/spool/ftn/outb")

...deon

...ëîåï
--- SBBSecho 3.27-Linux
 * Origin: I'm playing with ANSI+videotex - wanna play too? (3:633/509)
SEEN-BY: 105/81 106/201 128/187 129/14 305 153/7715 154/110 218/700
SEEN-BY: 226/30 227/114 229/110 200 206 275 300 307 317 426 428 470
SEEN-BY: 229/664 700 705 266/512 280/464 291/111 292/854 320/219 322/757
SEEN-BY: 342/200 396/45 633/267 280 281 290 384 410 418 420 509 2744
SEEN-BY: 712/848 770/1 902/26
PATH: 633/509 280 229/426