TZUTC: 1000
MSGID: 2189.fdn_binkd@3:633/509 2d44c7d6
REPLY: 2:280/464.47@fidonet 68df83d0
PID: Synchronet 3.21a-Linux master/b7d3db6c3 Sep 28 2025 GCC 10.2.1
TID: SBBSecho 3.29-Linux master/b7d3db6c3 Sep 28 2025 GCC 10.2.1
COLS: 80
BBSID: ALTERANT
CHRS: ASCII 1
FORMAT: flowed
NOTE: FSEditor.js v1.105
  Re: BINKD Multi-Batch
  By: Oli to deon on Fri Oct 03 2025 08:42 am

Howdy,

 >  de> I noticed that binkd advertises binkp 1.1, but does it do multi batch?
 >
 > It should receive multiple batches and do multi-batch on file request, if an
 > external FREQ processor is configured. I'm not sure if it does a rescan of
 > the outbound after M_EOB.

From what I've seen it doesnt. Nor does it wait for a second EOB from the
remote if it sent something to it.

 >  de> If it doesnt do multibatch what does it do over 1.0?
 >
 > Single batch / Close the connection after it has sent and received the first
 > M_EOB?

Yep, that's what I've noticed.

So hence my question - it advertises 1.1, but what's different from 1.0?



...ëîåï
--- SBBSecho 3.29-Linux
 * Origin: I'm playing with ANSI+videotex - wanna play too? (3:633/509)
SEEN-BY: 105/81 106/201 128/187 129/14 305 153/7715 154/110 218/700
SEEN-BY: 226/30 227/114 229/110 200 206 275 300 307 317 426 428 470
SEEN-BY: 229/664 700 705 266/512 280/464 291/111 292/854 320/219 322/757
SEEN-BY: 342/200 396/45 633/267 280 290 384 410 414 418 420 422 509
SEEN-BY: 633/2744 712/848 770/1 902/26
PATH: 633/509 280 229/426