Hi Mark,

* In a message originally to Rudi Timmermans, mark lewis said:

 > that is not a valid baud rate... is this using a FOSSIL or no?

Yes i know i use when open the port Netfoss like to docs descript i have 

install it.

 > FWIW: the valid baud rates are...

 > 110, 300, 600, 1200, 2400, 4800, 9600, 14400,  19200, 28800, 38400,
 > 56000, 57600, 115200

Yes Mark, i know this also ;)

 > you should not "float" your serial connection... you should run it with a
 > "locked" port rate and then let the (virtual) modem handle the actual
 > connect rate with the remote on its own while talking to the local "port"
 > at one specific rate...

I dont use a virtual comport i use the EleServ from EleBBS itself and this 

make a telnet connection on 115200.

But anyway Mark i have found a key for the QWK door and it is new registered!

Vriendelijke Groeten / Greetings,
Rudi Timmermans.


---
 * Origin: The Renovator BBS - Telnet: renovatorbbs.dyndns.org:5432
(1:261/38.10)