From: Pee@4free.onatree
"Canadian Cabal" wrote in message
news:ldgbc5$2ra$1@speranza.aioe.org...
> wrote in message
>> news:bf7e6df9-c65f-4bb9-91fd-deee7b7319c9@googlegroups.com...
> >
>> Hi everyone, February 11, 2014
>>
>> I would like to use my Sitecom router as an access point. Is this the way
>> to
>> do it?
>>
>> I am using Windows 7 Ultimate and I have a Ubee UVW-3200 cable
>> Modem/Router.
>> On port 1, I connect a second Sitecom Wi-Wi Router AC1750 WLR-8100
>> connected
>> to its WAN port.
>>
>> I would like my Sitecom Router to become an Access Point with the same
>> (2.4
>> GHz) SSID as the Ubee Modem/Router, so that I can "roam" throughout the
>> house without losing signal. The 5.0 GHz Wi-Fi of the Sitecom AP should
>> still be useable when within reach.
>>
>> Current configuration settings (Sitecom as Router):
>> Ubee Router Sitecom Router
>>
>> LAN IP adres: 192.168.178.1 192.168.10.1
>> DHCP Server: Enabled Enabled
>> Ipv4 address: 192.168.178.10 192.168.178.10
>> DHCP Status: No DHCP clients Show all clients
>> 2.4 GHz Radio: Disabled Enabled
>> 5.0 GHz Radio: N/A Enabled
>> 2.4 GHz - SSID: Ziggo5C5CC Sitecom0F7FF1
>> 2.4 GHz channel: Disabled Automatic
>> 5.0 GHz channel: N/A Automatic
>> 2.4 GHz security: WPA+PSK WPA+PSK
>> 2.4 GHz password Ubee's own PW Sitecom's own PW
>> 5.0 GHz - SSID: N/A Sitecom0F7FF2
>> 5.0 GHz security: N/A WPA+PSK
>> 5.0 GHz password: N/A Sitecom's own PW
>> Network connection: LAN Port 1 WAN Port
>>
>> Proposed configuration settings (Sitecom as Access Point):
>> Ubee Router Sitecom Access Point
>>
>> LAN IP address: 192.168.178.1 192.168.178.2
>> DHCP Server: Enabled Disabled
>> Ipv4 address: 192.168.178.10 N/A
>> DHCP Status: Show all clients N/A
>> 2.4 GHz Radio: Enabled Enabled
>> 5.0 GHz Radio: N/A Enabled
>> 2.4 GHz - SSID: Ziggo5C5CC Ziggo5C5CC
>> 2.4 GHz channel: 1, 6, 11, or Auto 1, 6, 11, or Auto
>> 5.0 GHz channel: N/A Automatic
>> 2.4 GHz security: WPA+PSK WPA+PSK
>> 2.4 GHz - password: Ubee's own PW Ubee's own PW
>> 5.0 GHz SSID: N/A Sitecom0F7FF2
>> 5.0 GHz security: N/A WPA+PSK
>> 5.0 GHz password N/A Sitecom's own PW
>> Network connection: LAN Port 1 LAN Port 1
>>
>> Questions:
>> 1. Will this configuration work as intended?
>> 2. Can I have the same 2.4 GHz SSID (Ziggo5C5CC) on my Ubee Router and my
>> Sitecom AP?
>> 3. Will I still have cabled internet on my Sitecom AP?
>> 4. Will I still have Wi-Fi internet on 2.4GHz and 5.0 GHz of my Sitecom
>> AP?
>> 5. With its DHCP disabled, can I still acces the Sitecom AP configuration
>> page through my PC browser when using the Windows 7 TCP/IPv4
>> configuration
>> of "obtaining an IP address automatically", or do I have to use the
>> Windows
>> 7 PC TCP/Ipv4 configuration of "use the following IP address:", and enter
>> the new Sitecom LAN IP address of: 192.168.178.2?
>>
>> If I do not do things right, any suggestions would be greatly
>> appreciated.
>>
>> Many Thanks,
>>
>> Rolf Schreiner
>> schreinerrolf@gmail.com
>>
>
> Hello Rolf,
>
> Perhaps try: http://www.dslreports.com/forum/othermfg
>
> as this group is occupied by a freak named Tony aka THE COLONEL aka
> Peeassha. They have killed the group and chased off anyone that can
> assist.
>
> --
> --
> Royal Canadian Internet Cabal / Cabale royale du Canada
THE COLONEL fought in Nam, i've never even been to Vietnam but i'd like to
kill those Vietcong fuckers.
--- SoupGate-Win32 v1.05
* Origin: you cannot sedate... all the things you hate (1:229/2)
|
