TZUTC: -0500
MSGID: 1097.clascomp@1:2320/105 26794797
REPLY: 1:387/26 e7876a3c
PID: Synchronet 3.19c-Linux master/cb76b1463 Feb 20 2022 GCC 7.5.0
TID: SBBSecho 3.14-Linux master/cb76b1463 Feb 20 2022 GCC 7.5.0
BBSID: CAPCITY2
CHRS: ASCII 1
> This weekend being a long one here in the US, I think I'm either going to
> work on an 1802 "COSMAC" kit or an "Altaid" kit. Both were purchased from Lee
> Hart, and the first step is checking that I have all of the parts, which I
> believe I do.

It was not a long weekend here in Kentucky.  :)

> I have built one of Lee's kits previously, the Z80 Membership Card, but I
> took a little bit different route this time. For the Z80 kit, I bought the
> whole kit including all of the needed parts. For the 1802 and Altaid kits, I
> decided to source most of the parts myself. I strongly regret that decision
> and would very much recommend against it. Lee has all of the parts at his
> disposal and tracking them all down myself was a huge pain in the backside.

I will keep this lesson of yours in mind for sure.

The "Altaid" is the one that is meant to fit in an Altoids box, right?

Mike


 * SLMR 2.1a * Groundwater. Do you mean crushed ice?
--- SBBSecho 3.14-Linux
 * Origin: capitolcityonline.net * Telnet/SSH:2022/HTTP (1:2320/105)
SEEN-BY: 1/123 15/0 18/200 90/1 105/81 106/201 120/340 616 123/10
SEEN-BY: 123/131 129/305 330 331 153/7715 154/10 50 218/700 220/90
SEEN-BY: 226/18 30 227/114 229/110 206 317 400 424 426 428 452 664
SEEN-BY: 229/700 240/5832 266/512 282/1038 292/854 301/1 317/3 320/219
SEEN-BY: 322/757 342/200 396/45 460/58 633/280 712/848 2320/0 33 105
SEEN-BY: 2320/108 195 304 3634/12
PATH: 2320/105 154/10 229/426