TID: Mystic BBS 1.11
MSGID: 1:124/5017 4ed42f67
REPLY: 27689.classic_computer@1:226/16 31daf046
TZUTC: 0000
I'm assuming one is familar with how to get a com port working. So the rest
just comes down to what dailer program one uses and reading up on the AT+
instruction set for the device.

http://fab.cba.mit.edu/classes/865.15/people/dan.chen/esp8266/

Would be a good resource for those at commands.

--- Mystic BBS v1.11 (Linux)
 * Origin: XM Core (1:124/5017)
SEEN-BY: 1/123 15/0 2 18/200 19/36 34/999 90/1 104/57 106/201 116/18
SEEN-BY: 120/331 123/140 128/2 153/7715 218/700 222/2 226/16 17 227/114
SEEN-BY: 229/354 426 452 728 981 1014 230/150 152 240/1120 5832 249/206
SEEN-BY: 249/317 250/1 261/38 100 266/512 267/155 275/100 282/1031
SEEN-BY: 282/1056 291/1 111 317/3 320/119 219 322/757 340/400 342/13
SEEN-BY: 342/200 393/68 396/45 633/0 267 280 281 408 410 412 640/1384
SEEN-BY: 712/620 848 886 770/1 801/161 189 2320/105 3634/12 5020/1042
SEEN-BY: 5053/58
PATH: 124/5017 5014 396/45 261/38 712/848 633/280 229/426