MSGID: 2:240/5824.1@fidonet f01ebeca
REPLY: 2:310/31 608fd605
PID: OpenXP/5.0.49 (Linux) (x86_64)
CHRS: ASCII 1
TZUTC: 0200
Am 03.05.21 schrieb Richard Menedetter@2:310/31 in CLASSIC_COMPUTER:

Hallo Richard,

RM> I have the KIM-Uno from the same guy.
RM> https://obsolescence.wixsite.com/obsolescence/kim-uno-summary-c1uuh

Oh, this one is new to me - it's neat :)

AN>> Besides, I've built an RC2014, a "new" Z80-based machine where I'm
AN>> using  CP/M on, together with several add-on cards (sound, terminal,
AN>> RTC ...). And I have a SC126, also a "new" design, based on a Z180. It
AN>> uses the same  bus pinout as the RC2014 and so I can also use the same
AN>> add-on cards  there. I also use CP/M on this machine.

RM> My problem is I am really terrible at soldering ...

I had also almost no idea about soldering, but I just started with the  
"RC2014 Pro" model and got some practice with it (and also watched some  
YouTube tutorials *g*).
But the RC2014 worked from the first try (and still does) :)

RM> Do you have links to the above 2 projects?

I don't know which two you are meaning, as I mentioned 3: *g*

- RC2014: https://rc2014.co.uk
  Store: https://www.tindie.com/stores/Semachthemonkey/
- SC126: https://smallcomputercentral.wordpress.com
  Store: https://www.tindie.com/stores/tindiescx/
  He has a wide range of products and computer models :)
- Imsai 8080 replica: https://thehighnibble.com/imsai8080/

Regards,
Anna

--- OpenXP 5.0.49
 * Origin: Imzadi Box Point (2:240/5824.1)
SEEN-BY: 1/123 18/200 90/1 105/81 120/340 123/131 129/305 154/10 226/30
SEEN-BY: 227/114 702 229/101 424 426 428 452 664 700 981 1016 1017
SEEN-BY: 240/2100 5138 5411 5824 5832 5853 249/1 206 317 400 280/464
SEEN-BY: 282/1038 292/854 301/1 310/31 317/3 320/219 322/757 342/200
SEEN-BY: 633/280 2452/250 2454/119
PATH: 240/5824 5832 229/426