From: avavalesk@yahoo.gr   
      
    Ok, save your FIS in the workspace.   
    Then in the simulink, make your two inputs, and feed your fuzzy system in a   
   2line matrix, the first row has your first double input( 1 line->1st   
   input)(2nd line 2nd input)   
    In this way you if you want to feed a series of 100 different double inputs   
   you must make a (100x2) matrix.   
   I tried it and works fine.   
      
   Ciao   
      
      
   "slinux"  wrote in message   
   news:1144194316.741128.126210@g10g2000cwb.googlegroups.com...   
   >I have done that. But my problem is in simulink. the Fuzzy logic   
   > controller block in simulink seems to accept only a single input,   
   > single output. Hence when i load the FIS function which has the 2   
   > inputs and 1 output, simulink will not accept it. How can i change the   
   > inputs on the Fuzzy controller block in Simulink or how can i program   
   > it to accept 2 inputs?   
   >   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)