From: avavalesk@yahoo.gr   
      
   No, i mean if your first measurement has error 0.2 and cahnge in error 0.05   
   and your 2nd measurement has 0.3 and 0.1 then give ONE input of the FIS in   
   simulink a matrix in the following state:   
   [ 0.2 0.05 ; 0.3 0.1 ].   
      
   "slinux"  wrote in message   
   news:1144253439.716587.133570@j33g2000cwa.googlegroups.com...   
   > Thanks for all your help.   
   >   
   > I could not quite understand what you wrote about making 2 inputs and   
   > using matrix. If you don't mind, could you explain it in more detail. I   
   > tried adding 2 inputs on Simulink, but the FLC block that i take from   
   > the FL toolbox only has one input and i could not see nay way to add   
   > another input to it.   
   > Are you trying to tell me to create my own rule base in Simulink.   
   > I may be way off target on this one.   
   >   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)