From: invalid@nospicedham.lkntrgzxc.com   
      
   On Sat, 21 Jul 2018 20:27:41 +0700   
   JJ  wrote:   
      
   > On Sat, 21 Jul 2018 02:56:31 -0400, Rod Pemberton wrote:   
      
   > The code I use is:   
   >   
   >   mov al, 8fh   
   >   out 70h, al   
   >   mov al, 0   
   >   out 71h, al   
   >   
      
   My code is in C, but that appears to be the correct values to disable   
   NMI and clear CMOS 0Fh, followed by the required mandatory port read.   
      
   If you follow that cold by the 8042 Keyboard controller reset code that   
   Wolfgang posted, you should get a reset.   
      
   In this case, you've only set one of the two cold/warm reboot flags,   
   i.e., CMOS 0Fh, but not the BDA value at memory location 0472h.   
      
      
   Rod Pemberton   
   --   
   As long as the UK continues to work with the EU, Brexit won't happen.   
   The first pawn sacrifice: Gibraltar. Set Gibraltar free.   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)