From: rick.c.hodgin@gmail.com   
      
   On Tuesday, December 4, 2018 at 12:56:44 PM UTC-5, R.Wieser wrote:   
   > Looking in the "The IA-32 Intel Architecture Software Developer's Manual,   
   > Volume 2 - Instruction Set Reference (24547112).pdf" document I can find   
   > multiple entries having the 0xD9 opcode, and from it I take it that the   
   > bytes following the above INT 0x35 are also playing a role: 0x7E 0xFA 0x8A   
   > ...   
   >   
   > I have abslutily *no* idea how to match it up with the 0x7E opcode folowing   
   > the INT 0x35.    The explanation for the "/6" is as follows:   
      
   I apologize, Rudy.  I completely misunderstood what you were posting   
   here.  My mistake.   
      
   Is it possible 0x8afa or 0xfa8a is a memory pointer to the instruction   
   to emulate, or an offset in the current data segment?  I would trace   
   into the interrupt in the debugger and see how it decodes those values.   
      
   Also, interrupts are usually signaled with values in the registers or   
   on the stack being setup.  What does it do before that INT 35h?   
      
   --   
   Rick C. Hodgin   
      
   --- SoupGate-Win32 v1.05   
    * Origin: you cannot sedate... all the things you hate (1:229/2)